[1]  Sanming Du, Zhen Li, Zhitao He, Huiling Ding, Xiaochao Wang, Yongzhen Zhang.  Effect of temperature on the friction and wear behavior of electroless  Ni-P-MoS₂-CaF₂ self-lubricating composite coatings.  Tribology International, 2018, 128(12): 197-203.

[2]  Sanming Du, Xiaochao Wang, Zhen Li, Zhenghai Yang.Effect  of Ni Content on Microstructure and Characterization of Cu-Ni-Sn Alloys.Materials,  2018, 11, 1108: 1-8.  

[3]  Yanyan Zhang, Yongzhen Zhang, Sanming Du, Chenfei Song, Zhenghai Yang, Bao  Shangguan. Tribological properties of pure carbon strip affected by dynamic  contact force during current-carrying sliding. Tribology International, 2018,  123: 256-265.

[4]  Yanyan Zhang, Yongzhen Zhang, Chenfei Song. Arc Discharges of a Pure Carbon  Strip Affected by Dynamic Contact Force during Current-Carrying Sliding.  Materials, 2018, 11: 796-810.

[5]  Xin Zhang, Yongzhen Zhang, Sanming Du, Tiantian He, Zhenghai Yang. Influence  of Braking Conditions on Tribological Performance of Copper-Based Powder  Metallurgical Braking Material. Journal of Material Engineering and  Performance, 2018, 27:4473-4480.

[6]  Xin Zhang, Yongzhen Zhang, Sanming Du, Tiantian He, Zhen Li. Study on the Tribological  Performance of Copper-Based Powder Metallurgical Friction Materials with  Cu-Coated or Uncoated Graphite Particles as Lubricants. Materials, 2018, 11:  1-8.

[7]  Wenbo Yu, Deqiang Chen, Liang Tian, Hongbin Zhao, Xiaojun Wang.  Self-lubricate and anisotropic wear behavior of AZ91D magnesium alloy  reinforced with ternary Ti₂AlC MAX phases. Journal of Materials  Science & Technology. (In press)

[8]  Lihua Fu, Wei Han, Lin Zhao, Karin Gong, Sven Bengtsson, Meng Zhou, Changhai  Li, Zhiling Tian. Effects of Cr₃C₂ content and  temperature on sliding friction and wear behaviors of Cr₃C₂/Ni₃Al  composite materials. Wear, 2018, 414-415: 163-173.

[9]  Yongcun Cui, Sier Deng, Rongjun Niu, Guoding Chen. Vibration effect analysis  of roller dynamic unbalance on the cage of high-speed cylindrical roller  bearing. Journal of Sound and Vibration, 2018, 434: 314-335.

[10]  Sier Deng, Yujia Lu, Wenhu Zhang, Xue Sun, Zhenwei Lu. Cage slip  characteristics of a cylindrical roller bearing with a trilobe-raceway.  Chinese Journal of Aeronautics, 2018, 31(2): 351-362.

[11]  Yongcun Cui, Sier Deng, Ni Yanguang, Guoding Chen. Effect of roller dynamic  unbalance on cage stress of high-speed cylindrical roller bearing. Industrial  Lubrication and Tribology, 2018, Doi: 10.1108/ILT-01-2018-0042.

[12]  Sier Deng, Jinfang Gu, Yongcun Cui. Dynamic analysis of tapered roller  bearing. Industrial Lubrication and Tribology. 2018, 70(1): 191-200.

[13]  Yi Xiong, Tiantian He, Yan Lu,  Fengzhang Ren, Alex A. Volinsky, Wei Cao. Tensile  deformation temperature impact on microstructure and mechanical properties of  AISI 316LN austenitic stainless steel, Journal of Materials Engineering and  Performance, 2018, 27(3):1232-1240.

[14]  Xiuhua Guo, Yanjun Zhou, Kexing Song, et al.  Microstructure and properties of Cu-Mg alloytreated by internal oxidation.  Materials Science and Technology, 2018, 34(6): 648-653.

[15]  岳洋,  孙逸翔,  孙毓明,  宋晨飞,  逄显娟,  张永振.  载荷和电压对纯铜滚动载流摩擦学性能的影响.  摩擦学学报,  2018, 38(1): 67-74.

[16]  邓四二,  张言伟,  王恒迪,  张继涛,  张文虎.  基于HVD降噪和多频段频谱叠加的圆柱滚子轴承故障诊断.  振动与冲击,  2018, 37(11): 136-144.

[17]  黄运生,  邓四二,  张文虎,  胡洁,  孙立明,  马子魁.  冲击载荷对铁路轴箱轴承塑料保持架动态性能影响研究.  振动与冲击,  2018, 37(1): 172-180.

[18]  倪锋,  陈跃,  杜三明,  张永振.  不同组织高铬白口铸铁低速重载滑动干摩擦磨损行为.  机械工程材料,  2018, 42(3): 18-23.

[19]  邓四二,  华显伟,  张文虎.  陀螺角接触球轴承摩擦力矩波动性分析.  航空动力学报,  2018, 33(07): 1713-1724.

[20]  孙雪,  邓四二,  陈国定,  张文虎.  弹性支承下圆柱滚子轴承保持架稳定性分析.  航空动力学报,  2018, 33(02): 487-496.

[21]  胡永乐,  邓四二,  李影,  张文虎,  黄晓敏.  汽车轮毂轴承唇形密封圈密封性能优化研究.  润滑与密封,  2018, 43(09): 54-61.

[22]  袁振军,  贺甜甜,  杜三明,  张永振.  硼铁含量对铜基粉末冶金制动材料性能的影响.  材料导报,  2018, 32(18): 3223-3229.

[23]  宋晨飞, 孙逸翔, 孙毓明, 张燕燕, 张永振. 基于斜面的摩擦力显微镜探针扭转系数标定改进方法. 摩擦学学报,  2018, 38(6): 652-657.

[24]  温毅博,  上官宝, 张永振, 宋晨飞,  杨正海.  碳纤维质量分数对Al₂O₃弥散强化铜复合材料的载流摩擦磨损性能影响.  粉末冶金技术,  2018, 36(3): 177-181.

[25]  王帅, 杨军. MAX相陶瓷摩擦学研究进展. 摩擦学学报,  2018, 38(6): 735-746.

[26]  李亚军,  孙乐民,  逄显娟,  牛一旭,  张永振.  织构直径对45钢摩擦磨损性能的影响.  河南科技大学学报(自然科学版),  2018, 39(6): 1-13.

[27]  李亚军,  逄显娟,  孙乐民,  牛一旭,  张永振.  激光表面织构化对  45 钢摩擦磨损性能的影响.  表面技术,  2018, 47(8): 147-154.

[28]  张振凯,  上官宝,  陈德强,  张永振,  陈慧敏,  牛永平.  海洋构筑物表面等离子熔覆TiC/Ni复合材料涂层的人体步进防滑性能.  舰船科学技术,  2018, 40(9):  82-88.

[29]  倪锋,  朱雁风,  朱鹏飞,  张俊浩.  硫酸镍水溶液全浓度范围分光吸收特性研究.  电镀与精蚀,  2018, 39(12): 36-40.

[30]  孙玉飞,  王景华,  邓四二,  张文虎.  基于C#语言的深沟球轴承优化设计软件.  轴承,  2018(07): 61-66.

[31]  王恒迪,  赵彪,  杨建玺,  邓四二.  滚动轴承故障诊断系统的设计及应用.  机床与液压,  2018, 46(07): 156-159.

[32]  张帅,  杜学芳,  邓四二.  低通滤波器腔体的车削加工.  机床与液压,  2018, 46(02): 151-153.

[33]  常红慧,  杨正海,  张永振,  上官宝,  王小超.  分离速度对滑动载流摩擦过程中电弧及其烧蚀的影响.  河南科技大学学报(自然科学版),  2018, 39(4): 1-6.

[34]  国秀花, 龙飞, 周延军, 等. 粉末冶金法制备氧化物颗粒增强Cu基复合材料[J].  特种铸造及有色合金, 2018,  (2): 205-209.

[35]  冯江, 宋克兴, 梁淑华, 等. 混杂增强铜基复合材料研究进展. 材料热处理学报,  2018,39(5):1-9.

[36]  李国辉, 刘勇, 国秀花, 等. TiB₂/Cu复合材料的电弧侵蚀行为. 复合材料学报, 2018, 3: 616-622.

[37]张胜利, 宋克兴, 国秀花, 等. TiB₂颗粒混杂对TiB₂ /Cu复合材料微观组织和性能的影响. 材料热处理学报,  2018, 39(8): 7-13.